Extralink's cost-effective SFP RJ45 1.25G 100M module
The Extralink SFP RJ45 module with a throughput of 1000 Mb/s is a powerful and cost-effective device that complies with Gigabit Ethernet and 1000-BASE-T standards defined by IEEE 802. 3-2002 and IEEE 802.3ab. The SFP RJ45 cartridge supports a data rate of 1000 Mbps at to 100 meters for Category 5 Ethernet cable and a 1000 Mbps full duplex data link with 5-level pulse amplitude modulation (PAM). All four pairs in the cable are used with a symbolic speed of 250 Mbps for each pair. Extralink SFP RJ45 provides standard serial ID information in accordance with SFP MSA, which can be accessed with A0h address via 2-wire CMOS EEPROM serial protocol. The physical IC can also be accessed via the 2-wire serial bus at the address A0h. The SFP RJ45 module is compatible with most Gigabit SFP ports on network devices. The device has a fully metallic housing and therefore low EMI.
Special features
Special features
- Two-way data links with data rates up to 1.25 Gb/s
- Connecting the SFP without switching off the unit
- Wide temperature range of the housing (0°C to 70°C)
- All-metal housing for low EMI
- Low power dissipation (typically 1.05 W)
- Compact RJ-45 connector assembly
- Access to the physical layer IC via the two-wire serial bus
- 1000 BASE-T operation in host systems with SERDES interface
- 10/100/1000 Mbps compatibility in host systems with SGMII interface
----------------
| Output connector | RJ45 |
| SFP module - port speed | 1,25 Gbps |
| Transmission distance | Less then 1km |
| Certification | FCC |
| Copper ethernet cabling technology | 100BASE-T,1000BASE-T |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Ethernet LAN | Yes |
| Interface type | SFP |
| Maximum data transfer rate | 1250 |
| Maximum operating temperature | 70 |
| Maximum transfer distance | 100 |
| Number of products included | 1 |
| Power consumption (typical) | 1.05 |
| SFP transceiver type | Copper |
| Sustainability certificates | CE, RoHS |
