Extralink SFP28 25G | SFP28 WDM Module | 25Gbps 1270/1330nm, single mode, 10km, LC, DOM, pair

Economical SFP28 25G module

The Extralink SFP 25G supports up to 25.78 Gbps, a cost-effective module that complies with the Gigabit Ethernet and 1000-BASE-T standards specified in IEEE 802.3cc. The SFP28+ is designed for a maximum distance of up to 10km to Category 5 Ethernet cable. The transceiver designs are optimized for high performance and cost-effectiveness to provide customers with the best solution for 25 Gbps single-band optical links. The SFP28+ insert has a very low power consumption (no more than 1.5 W) and an operating temperature range from 0°C to 70°C.

Product features

• Opses a bit rate up to 25.78 Gb/s
  
• Compliant with IEEE 802.3cc
  
• Digital diagnostic monitor interface with SFF-8472
  
• 1310nm DFB transmitter
  
• Affecting 10Km SMF connection
  
• High transmission margin
  
• Low power consumption<1.5W
  
• A single 3.3V power source
  
• Temperature: 0 to 70 °C

  Functional scheme

  
  
  

  Definicja pinów i funkcje

  
  
  
  
  
  
  
  
  
  ----------------

  Output connector	LC
  SFP module - port speed	25 Gbps
  Transmission distance	4-20km
  Ethernet LAN	No
  Fiber optic connector	LC
  Fiber type	SM (Single-Mode)
  Input voltage	3.3
  Interface type	SFP28
  Maximum data transfer rate	25780
  Maximum transfer distance	10000
  Networking standards	IEEE 802.3cc
  Power consumption (typical)	1.5
  Power over Ethernet (PoE)	No
  SFP transceiver standard	CWDM
  SFP transceiver type	Fiber optic
  Single-mode fiber (SMF) supported	Yes
  Tx wavelength (max)	1330
  Tx wavelength (min)	1270
  Type of SFP duplex	Wavy (WDM)
  Wavelength	1270/1330 nm
  Wavelength	1310