SONOFF SNZB-06P Human Presence Sensor, Zigbee

SONOFF Smart Human Presence Sensor, Zigbee

SONOFF smart home system allows you to control your electrical appliances remotely with the EWeLink app or by voice with Amazon Alexa or Google Home. It allows you to create different scenarios, group appliances by switching on/off multiple devices with a single touch, set timers and schedules, monitor the status of your devices in real time, and share their control. Link your eWeLink with IFTTT application and extend your scene capabilities. Thanks to configurable local LAN support Sonoff smart home system can work without a cloud server.

Features

SONOFF SNZB-06P is an advanced sensor operating on the Zigbee protocol, designed to detect the real presence of people, and optimize lighting and energy management. The sensor operates on 5.8GHz microwave radar and responds to movement and human breathing. It detects not only moving but also stationary people, so you can avoid such uncomfortable situations when the light is automatically turned off, although stationary people remain in the room.

The device has a range of 4 meters, and it can be as far away from the Zigbee control panel as 30 meters.

This device can automatically turn on the lights when you pass by or enter the room, and turn them off when you leave the room, thereby helping to save electricity and increase the comfort of everyday life. The smart sensor reacts to light and determines whether the ambient light is sufficient, so it does not automatically turn on the lights during the day.

The SONOFF SNZB-03P sensor is compatible with SONOFF Zigbee devices such as NSPanel Pro, iHost, ZB Bridge Pro, ZBDongle-E, but also supports other Zigbee hubs such as SmartThings Hub V3, AeoTec Smart Home, Echo Plus 2nd Generation, Echo 4th Generation or Echo Show 2nd, so it can be easily integrated into an existing smart home system.

Easy installation and control. The small and compact sensor is easy to apply. Attached with 3M adhesive or screws, the sensor can be glued directly to the desired surface without damaging it. It also has a magnetic suction design, so it can stick anywhere and rotate at any angle.

The free mobile app eWeLink (Android, IOS) is used for settings. Since it is also compatible with the SmartThings hub, it can also be controlled using the SmartThings app (Android, IOS).

Voice control via Google Assistant or Amazon Alexa is supported.

This device can be combined with various other products to complete smart home scenarios. The sensor is especially suitable for bathrooms, hallways, office desk, study rooms or reading areas where stationary people spend a lot of time.

Notes

The sensor responds to moving objects, so avoid installing it near blinds or fans. It can also detect pets. Avoid installing it outdoors or under rotating objects.

The mounting surface must be solid and vibration-free.

NOTE: ZigBee hub is required for the device to function.

Technical specifications

Compatible with: Sonoff ZBDongle-P, ZBDongle-E, NSPanel Pro, ZBBridge, ZBBridge-P, iHost, etc.

Detection distance: up to 4 m.

Minimum detection time: 15 s.

Chip: EFR32MG22.

Wireless communication: Zigbee 3.0 (IEEE802.15.4).

Power: 5V/1A.

Power connector: USB Type-C.

App: eWeLink (Android, iOS).

Works with Amazon Alexa, Google Assistant, Alice.

Operating temperature: -10°C~+60°C.

Operating humidity: 5%-95%RH (non-condensing).

Material: ABS+PC.

Color: white.

Dimensions: 44.2x44.2x59mm.

Weight: 31g.

Warranty: 24 months.

Specifications