EXTRALINK 1 PORT POE INJECTOR AND SPLITTER
Poe injector and splitter set is an ideal solution when you need to power a device that does not support either IEEE 8023af or passive PoE, but due to the location of the device there is a need to power it over twisted pair cable. In addition to supplying power, simultaneous network communication at a speed of 100Mbps is also possible.
The set consists of an injector that feeds voltage into the Ethernet cable and a splitter that feeds voltage into the jack connector. The maximum input voltage is 48V DC. The power injector can be used to connect to a surveillance system with IP cameras that do not support Power ovber Ethernet or to wireless LAN access points. Using PoE injectors and splitters means you can use non-PoE switches.
Specifications
| Wall mountable | No |
|---|
| Product colour | White |
|---|
| Ethernet LAN (RJ-45) ports | 2.0000 |
|---|
| Power over Ethernet (PoE) | Yes |
|---|
| Power over Ethernet (PoE) voltage | 48 |
|---|
| Package type | Box |
|---|
| Rack mounting | No |
|---|
| Ethernet interface type | Fast Ethernet |
|---|
| Weight | 44 |
|---|
| Cabling technology | 10/100 |
|---|
| Easy to install | Yes |
|---|
| Plug and Play | Yes |
|---|
| RJ-45 input ports | 1.0000 |
|---|
| RJ-45 output ports | 1.0000 |
|---|
