HDMI signal extender up to 150m, 1080P.
The HDMI extender uses a single Ethernet cable (Cat5e or Cat6) instead of an HDMI cable to transmit high-definition video and audio signals up to 150 meters.
Using an Ethernet switch, this device can transmit the signal extending it to multiple receivers (point-to-multipoint function).
Features: HDMI IP Extender is based on TCP/IP standard.
Supports HDMI signal transmission up to 150m.
IEEE 802.3 Ethernet standard.
Supports HDCP 1.4 digital content protection standard.
Supports MJPEG decoding mode.
Supports local loop-out output (a monitor/TV can be connected next to the source).
Supports IR control.
Easy connection (plug and play), no additional software required.
Supports point-to-point, point-to-multipoint, and cascade connection modes.
The HDMI interface can be effective for TV, computer screens, DVD, projectors and cameras.
Technical specifications:Max. (CAT5e/CAT6 cable) length between transmitter and receiver: 150m.
HDMI resolution: 480p, 720p, 1080p.
Supported audio: Sample rate: 32kHz, 44.1kHz and 48kHz.
Power adapter: AC (50Hz, 60Hz) 100V-240V; DC 5V/1A.
Max. transmitter (TX) operating current: 500mA.
Max. receiver (RX) operating current: 500mA.
Operating temperature: 0°C ~ +45°C.
Operating humidity: 10-80%RH (non-condensing).
Dimensions: 93x79x21 mm.
Weight: TX 228g; RX 228g.
Transmitter Ports:
DC/5V – Power adapter port.
RESET – Reset/restart button.
IR-TX – IR transmitter port.
HDMI-IN – HDMI input.
HDMI-OUT – HDMI output.
ETHERNET – CAT5e/CAT6 cable port.
Receiver Ports:
DC/5V – Power adapter port.
RESET – Reset/restart button.
IR-RX – IR receiver port.
HDMI-OUT – HDMI output.
ETHERNET – CAT5e/CAT6 cable port.
Package Contents:Transmitter (TX).
Receiver (RX).
Power adapter x2 (5V/1A DC).
User manual.
Warranty: 24 months.
